Skip to content

Process Tech Non Contact Dust Measuring Instruments Solid Radar Level Meter-901

Detailed Product Description
Power Supply: 24VDC/220VAC Application: Liquid Or Solid
Protocol: Hart/RS485 Output Signal: 4-20mA
Display: LCD Display Precision: 3mm
Name: Radar Level Meter Range: 0-70m
Temperature: -40~250℃ / -40~150℃ Connect: Flange/thread

Product description

PTRD90 Series Radar Level Sensor is high-frequency level measuring instruments with the maximum measuring distance up to 70 meters. The antenna is further optimized, and the new-type microprocessor can perform higher rate of signal analysis and processing, making the instrument available for complex measurement conditions, such as reactors, solid silos,liquid.

The characteristics of radar level transmitter

1. Small antenna size, easy to install; Non-contact radar, no wear, no pollution.
2. Almost no corrosion, bubble effect; almost not affected by water vapor in the atmosphere, the temperature and pressure changes.
3. Serious dust environment on the high level meter work has little effect.
4. A shorter wavelength, the reflection of solid surface inclination is better.
5. Beam angle is small, the energy is concentrated, can enhance the ability of echo and to avoid interference.
6. The measuring range is smaller, for a measurement will yield good results.
7. High signal-to-noise ratio, the level fluctuation state can obtain better performance.
8. High frequency, measurement of solid and low dielectric constant of the best choice.

Model Selection

Model ATRD- 901/ 902/ 903 / 904/ 905/ 906
P Standard (Non-explosion-proof)
Intrinsically safe (Exia IIC T6 Ga)
G Intrinsically safe type, Flameproof (Exd (ia) IIC T6 Gb)
Process Connection / material
G Thread stainless steel 304
N Thread stainless steel 304
Flange stainless steel 304
Flange stainless steel Universal joint Nickel plated carbon steel
C DN100 / PP / 304 / / Flange stainless steel Universal joint Nickel plated carbon steel
D DN125 / PP / 304 / / Flange stainless steel Universal joint Nickel plated carbon steel
E DN150 / PP / 304 / / Flange stainless steel Universal joint Nickel plated carbon steel
H DN250 / PP / 304 / / Flange stainless steel Universal joint Nickel plated carbon steel
Special customization
Antenna type / material
Horn antenna Φ46mm/stainless steel 304
B Horn antenna Φ76mm/stainless steel 304
C Horn antenna Φ96mm/stainless steel 304
Horn antenna Φ121mm/stainless steel 304
E Parabolic antenna Φ196mm/stainless steel 304
F Parabolic antenna Φ242mm/stainless steel 304
G Special customization
Seal / Process Temperature
Viton/(-40~150) ºC
K Kalrez/(-40~250) ºC
Output
2 (4~20)mA/24V DC 2 wire
3 (4~20)mA/24V DC/HART 2 wire
4 (4~20)mA/220V AC/ 4 wire
RS485/Modbus
Shell / Protection Class
Aluminum /IP67
Q Stainless steel 316L/IP67
Cable Entry
M M20 x l. 5
N ½ ″NPT
Display Programming
With
Without