Skip to content

Process Tech ELECTROMAGNETIC FLOWMETER for Water Treatment

Download Technical Parameters PDF

Product description:

electromagnetic flowmeter, composed of sensor and converter, works based on Faraday’s law of

electromagnetic induction. It is used to measure electrical conductivity of liquid or solid. Generally, the electrical

conductivity should be over 5uS/cm (electrical conductivity of tap water, raw water is about 100-500uS/cm. It

can also be used to measure various mediums like acid, alkali, saline solution, paper pulp, ore pulp

and so on, but these mediums can’t contain a lot of magnetic materials and bubbles.



Technical Parameters

PTF Electromagnetic Flowmeter Divided type/ Integrated type Integrated type

with explosion proof

Basic Error ±0.2% or ±0.5% of indicated value
Diameter(mm) DN15-DN2400 DN15-DN600
Explosive-Proof Level ________ ExdmibllCT6
Flange Accord withGB119 standard Carbon steel (Stainless steel is optional)  
Pressure Level DN15-DN600 1.0,1.6,2.5,4.0MPa DN15-DN600 1.0,1.6,2.5,4.0MPa

DN3-DN600 1.0,1.6,2.5,4.0MPa

DN700-DN2400 0.6MPa  
Please consult with us if you order special pressure
Lining Materials PTFE, PU,CR, PFA, F46, IR
Conductivity ≥5μS/cm(Please consulate with us if less than 5μS/cm)
Electrode 316L, Hastelloy, Ti, Ta, Pt- Ir
Protection Level IP67 (for sensor, IP68 is optional) IP67
Medium Temperature -25°C-140°C (please refer to the choice of lining material) -25°C-80°C (please refer to the choice of lining material)
Ambient Temperature -25°C-60°C
Influence of Ambient Temperature <±0.1%/ 10°C or <±0.25%/ 10°C
Repetition ≤±0.1% or ±0.25%
Analog Output Error ≤±0.02mA
Measurement Range of Velocity ≤20m/s
Depth of Cover <5m (only for IP68) ________
Sensor Cable <100m (please consult with us if you need longer) ________
Electric Connections M20×1.5 seal, G1/2, NPT1/2
Output Interface Standard output (4-20mA), Dual current output, RS485, HART, Proflbus-PA

Download Technical Parameters PDF